Pattex Power Epoxy Clear Repair Tube

Features and Benefits

Pattex Power Epoxy Clear Repair gives you the super strong bonding power you need for almost any material. Not only does it dry transparent, but it won’t expand or shrink when curing. Resistant to water, oil and common solvents, Pattex Power Epoxy Clear Repair can be used for outdoor and indoor bonding applications and you can also paint, sand, polish and even drill it!

Pattex Power Epoxy Clear Repair cures in minutes, providing a strong and fast bond.



  • 2 x 11ml tubes


Application areas:

  • Metal
  • Marble
  • Ceramics
  • Fibreglass
  • Plastic (except PP, PE and Teflon®)
  • Wood
  • Glass
  • Cork
  • Concrete
  • Stone 



Product should be stored at a temperature between 10 ºC and 30 ºC.

Storage time:

3 years if kept closed in its original container, under the above mentioned conditions. After this time, product may still be suitable for use, but it is recommended to check it or to ask our Technical Service.

  • Extremely robust
  • Cures crystal clear
  • Waterproof
  • Dries fast

Product Features

Tips and tricks

Clean before hard


Even if you work with the utmost precision, some Pattex Epoxy can still go where you don’t quite want it to go. In this case use ethanol, or any other universal solvent, to clean any adhesive remains before they get hard.


Once hardened


Even if you know what you’re doing, mistakes can sometimes happen. And you most realize what went wrong when everything’s done. Once hard, Pattex Epoxy glues can only be removed mechanically. The best thing to do is use a scraper. But be sure to consult the instructions, so you know exactly what you’re doing.


Read the instructions


Before gluing anything together, take a moment to read the instructions included with the product. We really recommend you consult and follow the technical, safety and environmental information before using. It just makes more sense that way.

Step by step

  1. Make sure surfaces are clean, dry and free of grease or dust. If you can, roughen the surfaces, so the bond is stronger.

  2. Mix components at a ratio of 1:1. Squeeze equal amounts of component A and B out of the tubes and mix together until you only have one colour of adhesive.

  3. Apply the double-component mixture to one of the surfaces and join to the other surface.

  4. At room temperature, you have 3 minutes after mixing the components to join the surfaces.

  5. After 30 minutes, the bond is strong enough to allow for normal use again. You can exert stress after 2 hours, and objects are fully cured after 24 hours.