Pattex Power Epoxy Metal Repair Tube

Features and Benefits

Pattex Power Epoxy Metal Repair gives you the super strong bonding power you need for almost any material. Not only does it dry quickly but it won’t expand or shrink when curing. Resistant to water, oil and common solvents, Pattex Power Epoxy Metal Repair can be used both outdoors and indoors and you can also paint, sand, polish and even drill it!

Pattex Power Epoxy Metal Repair cures in minutes for a strong and fast bond.



  • 2 x 11ml tubes


Application areas:

  • Iron
  • Steel
  • Chrome steel
  • Nickel steel
  • Aluminium
  • Copper
  • Brass
  • Pewter
  • Lead
  • Glass
  • Fibreglass
  • Stone
  • Ceramic
  • Most Plastics
  • Wood



Product should be stored at temperatures between 10 ºC and 30 ºC.

Storage time: 3 years if kept closed in its original container, under the above mentioned conditions. Thereafter product may still be suitable for use, but it is recommended to test the product before use, or consult our Technical Department for assistance.

  • Fast and clean bonding
  • Does not shrink or expand when curing
  • Good resistance to water, oil and common solvents
  • Extremely robust
  • Grey once cured

Product Features

Tips and tricks

Clean before the product hardens


Even if you work with the utmost precision, some Pattex Power Epoxy can still go where you don’t want it to go. In this case use ethanol, or any other universal solvent, to clean any adhesive remains before it hardens.


Once hardened


Even professionals sometimes make mistakes. Once hard, Pattex Power Epoxy glues can only be removed mechanically. The best tool to use when removing hardened epoxy is a scraper.


Read the instructions


Before gluing anything together, carefully read the instructions on the product packaging. We really recommend you to consult and follow the technical and safety information before use.

Step by step

  1. Make sure surfaces are clean, dry and free of grease or dust. If you can, roughen the surfaces, so the bond is stronger.

  2. Mix components at a ratio of 1:1. Squeeze equal amounts of component A and B out of the tubes and mix together until you only have one colour of adhesive.

  3. Apply the double-component mixture to one of the surfaces and join to the other surface.

  4. At room temperature, you have 4 minutes after mixing the components to join the surfaces.

  5. After 5 minutes, the bond is strong enough to allow for normal use again. You can exert stress after 2 hours, and objects are fully cured after 24 hours.