Pattex Power Epoxy Syringe Clear

Features and Benefits

Pattex Power Epoxy is a fast setting, gap filling, two part adhesive which produces rigid bonds with high bond strengths. The glue line is resistant to water, fuels, grease and diluted acids and alkali.

Pattex Power Epoxy in the syringe is available in a 25 ml syringe and a 6 ml mini syringe!

 

Content: 

  • 6 ml

or

  • 25 ml

 

Application areas:

Pattex Epoxy can be used to bond the following:

  • wood
  • glass
  • ceramics
  • metals
  • cardboard
  • crystal
  • china
  • fabrics
  • porcelain
  • cork
  • fibreglass
  • certain plastics

The bond formed can be cut, sanded or planed when fully cured.

 

Storage:

Product should be stored at temperatures between 10 ºC and 30 ºC. 

Storage time: 3 years if kept closed in its original container, under the above mentioned conditions. Thereafter product may still be suitable for use, but it is recommended to test the product before use, or consult our Technical Department for assistance.

  • Extremely robust
  • Gap filling
  • Cures crystal clear
  • Does not yellow over time
  • Re-sealable tip (25 ml syringe only)

Documents and Downloads

Technical Data Sheet
Download TDS
TDS 25ml
Download Document

english

SDS 6ml
Download Document

english

SDS 25ml
Download Document

english

Product Features

Tips and tricks

Clean before the product hardens

 

Even if you work with the utmost precision, some Pattex Power Epoxy can still go where you don’t want it to go. In this case use ethanol, or any other universal solvent, to clean any adhesive remains before it hardens.

 

Once hardened

 

Even professionals sometimes make mistakes that are not noticed until much later. Once hard, Pattex Power Epoxy glues can only be removed mechanically. The best tool to use when removing hardened epoxy is a scraper.

 

Read the instructions

 

Before gluing anything together, carefully read the instructions on the product packaging. We recommend that you consult and follow the technical and safety information before use.

Step by step

  1. Make sure surfaces are clean, dry and free of grease or dust. If you can, roughen the surfaces, so the bond is stronger.

  2. Press the piston and mix both parts equally with a spatula.

  3. Apply the double-component mixture to one of the surfaces and join to the other surface.

  4. At room temperature, you have 3 minutes after mixing the components to join the surfaces.

  5. After 5 minutes, the bond is strong enough to allow for normal use again. You can exert stress after 2 hours, and objects are fully cured after 24 hours.